PlateSpin Server hosts must meet the following system requirements
Table 1-1 PlateSpin Server Host Requirements
|
Requirement |
Details |
|---|---|
|
Operating System |
Any of the following, running on dedicated hardware or in a virtual machine:
NOTE:You must activate your Windows operating system prior to installing PlateSpin Protect. |
|
Processor |
Minimum 1 GHz Recommended: multi-core, 2 GHz or higher |
|
Memory (RAM) |
Minimum 2 GB Recommended: 4 GB |
|
Disk Space |
Minimum 15 GB NOTE:Over time, space consumption will increase. |
|
Database Server |
One of the following:
|
|
Software Prerequisites |
|
Follow these installation guidelines for trouble-free installation and operation of PlateSpin Protect.
Table 1-2 Pre-Installation Checklist
|
Guideline |
Remarks |
|
|---|---|---|
|
|
Dedicated Host |
Install PlateSpin Protect on a dedicated physical or virtual machine. |
|
|
Credentials |
Perform all installation procedures using an account with administrative privileges. For Windows Server 2008 and Windows Server 2008 R2 systems, use the built-in Administrator account. |
|
|
IP Address |
Assign the PlateSpin Server host a static IP address. |
|
|
Collocation |
Do not collocate the PlateSpin Server with:
|
|
|
Database |
If you intend to use your own Microsoft SQL Server database (instead of the Microsoft SQL Server 2005 Express Edition included in your software distribution), make sure that it is supported and conforms to the product’s database requirements. See KB Article 7009809. |
|
|
UAC |
(Windows Server 2008 and Windows Server 2008 R2 only) Disable the User Account Control (UAC) during installation. |
|
|
Installation Workflow |
Install the prerequisite software in the indicated order. Below is a high-level workflow for a typical PlateSpin Protect installation:
|