4 GB RAM.
Dual CPU or Core (3.0 Ghz or comparable chip).
100 GB hard disk.
This amount is recommended to ensure ample space for logging in a production environment. This disk space must be local and not remote.
Windows Server 2008 R2 and 2012 R2 (physical or virtual), 64-bit operating system, in either Standard or Enterprise Edition, with the latest patches applied
Static IP address.
IMPORTANT:No LDAP software, such as eDirectory or OpenLDAP, can be installed. (A default installation of SLES installs and enables OpenLDAP)
For information about network requirements, see Network Requirements.
Installation time: about 10 minutes.
What you need to know to install the Identity Server |
|
Verify that the machine meets the minimum requirements. See Section 3.2.1, Installation Requirements on Windows.
Ensure that you have read and implemented prerequisites specified in Section 3.1.1, Prerequisites.
Close any running applications and disable any virus scanning programs.
(Conditional) If you have installed the Administration Console on this server, ensure that you have restarted the server before installing the Identity Server.
(Conditional) To use a remote desktop for installation, use one of the following:
Current version of VNC viewer
Microsoft Remote Desktop with the /console switch for Windows XP SP2
Microsoft Remote Desktop with the /admin switch for Windows XP SP3
Download software and run it.
For software download instructions, see theAccess Manager 4.0 Hotfix 1 Readme
.
Read the introduction, then click Next.
Accept the license agreement, then click Next.
Select Access Manager Identity Provider, then click Next.
A warning is displayed: If NAT is present between this machine and Administration Console, the NAT configuration needs to be done in Administration Console.
Specify the IP address, user ID, and password for the primary Administration Console.
(Optional) Specify the Identity Server Local NAT IP address, if the device is behind NAT.
Click Next, review the summary, and click Install.
(Conditional) If you are installing the Identity Server on a machine that contains a previous installation of the Administration Console, you are asked whether the program should overwrite an existing file in the \Program Files\Novell directory. Specify yes.
Continue with one of the following:
Verify the installation. See Verifying the Identity Server Installation
Install an Access Gateway. See Section 4.1.2, Installing the Access Gateway Appliance or Section 4.2, Installing the Access Gateway Service.
Configure the Identity Server. See Setting Up a Basic Access Manager Configuration
in the NetIQ Access Manager 4.0 SP1 Setup Guide
..
NOTE:After you install an Identity Server, you must create a cluster configuration. See Clustering Identity Servers
in the NetIQ Access Manager 4.0 SP1 Setup Guide
.