13.2 Stopping the Drivers

Before you upgrade any files, it is important to stop the drivers.

13.2.1 Using Designer to Stop the Drivers

  1. Select the Identity Vault identity vault object in the Outline tab.

  2. In the Modeler toolbar, click the Stop All Drivers icon Stop All Drivers icon.

    This stops all drivers that are part of the project.

  3. Set the drivers to manual start to ensure that the drivers do not start until the upgrade process is complete.

    1. Double-click the driver icon driver icon in the Outline tab.

    2. Select Driver Configuration > Startup Options.

    3. Select Manual, then click OK.

    4. Repeat Step 3.a through Step 3.c for each driver.

13.2.2 Using iManager to Stop the Drivers

  1. In iManager, select Identity Manager > Identity Manager Overview.

  2. Browse to and select the location in the tree to search for Driver Set objects, then click the search icon Search icon.

  3. Click the Driver Set object.

  4. Click Drivers > Stop all drivers.

  5. Repeat Step 2 through Step 4 for each Driver Set object.

  6. Set the drivers to manual start to ensure that the drivers do not start until the upgrade process is complete.

    1. In iManager, select Identity Manager > Identity Manager Overview.

    2. Browse to and select the location in the tree to search for Driver Set objects, then click the search icon Search icon.

    3. Click the Driver Set object.

    4. In the upper right corner of the driver icon, click Edit properties.

    5. On the Driver Configuration page under Startup Options, select Manual, then click OK.

    6. Repeat Step 6.a through Step 6.e for each driver in your tree.