3.2 Configuring the Required SATA Setting

PlateSpin Forge requires an Embedded SATA setting of ATA Mode in the System BIOS.

To configure the Embedded SATA setting:

  1. Access the System Setup utility.

    See Section 3.1, Accessing the System Setup Utility.

  2. In the System Setup Main Menu, select System BIOS.

  3. On the System BIOS Settings page, select SATA Settings.

  4. On the SATA Settings page, change the Embedded SATA setting to ATA Mode.

  5. Press Esc twice to return to the System Setup Main Menu.

  6. (Conditional) If you are prompted to save the changes made to the BIOS, click Yes.

    You should see a message indicating that the changes were saved successfully. Click OK to dismiss the confirmation.

  7. Exit the System Setup utility.

    See Section 3.4, Exiting the System Setup Utility.