NOTE:Changing the primary IP Address of an Access Manager Appliance is not recommended. This may result in corruption of the configuration store. However, you can modify the Listening IP address of Reverse Proxy or the Outbound IP address used to communicate with the Web Server.
To modify the Listening IP Address or Outbound IP address, do the following:
In the Administration Console, click Devices > Access Gateways > Select the device > New IP > click OK.
Add the secondary IP address if applicable to the interfaces from Network Settings > Adapter List.
Configure the DNS from Network Settings > DNS.
Add the Host entries (if any) from Network Settings > Hosts.
Set up the routing (if any) from Network Settings > Gateways.
Under Services, click on Reverse Proxy/Authentication. In the Reverse Proxy List, click the proxy service name. Select the newly added cluster member and select the listening IP address for that service.
(Optional) If you want to specify the outbound connection to the Web server, click Web Servers, then click TCP Connect Options. Select the Cluster Member and select the IP address from the drop down list against Make Outbound Connection Using if you want to select the outbound IP address to communicate with the Web server.
To modify the IP address of the Audit Server:
In the Administration Console, click Auditing > Novell Auditing.
On the Novell Auditing page, change the IP address for the server and, if necessary, the port.
Click OK.
Update all Access Gateways.
Reboot all servers, including the Access Gateways, to use the new configuration.