Use this Knowledge Script to monitor the status of Fibre Channel Array (FCA) host controllers.
The Knowledge Script raises:
A critical event if the controller fails, making drives on the controller inaccessible.
A degraded condition event if any of the controller’s logical or physical drives is not operating properly.
A warning if the status is not known.
FCA object
The default interval for this script is Every 10 minutes.
Set the following parameters as needed:
Description |
How to Set It |
---|---|
Community |
Specify the SNMP community string. The default is either the community name specified in AppManager Security Manager or public if no community name has been specified. |
Severity - SNMP or CIM failure |
Set the event severity level from 1 to 40, to indicate the importance of an event in which SNMP or HP SIM fails. The default is 9. |
Severity - Controller failed |
Set the event severity level from 1 to 40, to indicate the importance of an event in which the controller failed. The default is 5. |
Severity - Degraded drive |
Set the event severity level from 1 to 40, to indicate the importance of an event in which any of the controller's logical or physical drives is not operating properly. The default is 12. |
Severity - Unknown status |
Set the event severity level from 1 to 40, to indicate the importance of an event in which the status of the controller is unknown. The default is 15. |