2.2 Configuring Security Settings for the App

After installing the app, you must set up a PIN for the app.

It is recommended to enable the Pin and Touch ID options for maintaining the security and user's convenience respectively.

NOTE:You cannot edit the Pin and Touch ID settings if the settings have been enforced on the server by the Advanced Authentication administrator.

To configure the security settings on the app, perform the following steps:

  1. Tap Settings.

  2. Set Touch ID to ON to enable fingerprint authentication. The fingerprint you set for the phone is used as a touch sensor for your app.

    NOTE:

    • Touch ID is disabled if you disable the Pin setting.

    • The maximum attempts to specify an incorrect PIN is 10 after that the data on your app is erased.

    • If you provide an incorrect Touch ID for 3 to 4 attempts, the Touch sensor pop-up is not displayed and only the Enter PIN screen is displayed. Also, Touch ID is set to OFF and Pin remains ON.

  3. Set Pin to ON to enable the PIN protection for your app.

  4. Tap Change Pin to change the PIN of the app.

    Specify your current PIN, then specify and confirm the new PIN.